2007-08-18   Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.10
		- Added ATS3/Manchester support.
		- Added test of ATS3 link on configuration page.
		- Added context menu on secondary channel flags and output lines to enable faster channel closing.
		- Added TX lock. TX frequency indicated by a red arrow on the waterfall, if TX lock activated.
		- Added waterfall AVC. It is on by default, may be switched off. 
		  When AVC active, the only range is overriden. Threshold is still valid.
		- Fixed TX of long CW characters (missing '0')
		- Bugfix: Sometimes the preferences were reset on program exit.
		- During TX, invalid menu items are disabled.
		- Disabled printout of special characters (<NULL> etc). Special characters are considered errors.

2007-07-30  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.10
		- Added bandwidth indicator to waterfall ruler.
		- Added other channels indicators to the waterfall ruler. 
		  One may switch between channels by clicking on the channel flag.
		- Added transmitter tune mode.
		- RTTY decoder sensitivity improved by cca. 3dB in white noise.

2007-06-17  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.10
		- Added ATS3 support for MFSK modes (RTTY, Olivia/Contestia/RTTYM)
		- Moved tuning reference frequency for MFSK16 to center to be consistent with other modes.

2007-06-10  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.9
		- Added PTT keying by COM port (DTR & RTS pins)
		- Added ATS3/BELL202 support. Currently PSK modes, CW keying and frequency control is supported.
		- Bugfix: If the RX view gets focus, receive is suspended until the focus is lost. This way user is able 
                  to scroll back and select call/name/qth by mouse/stylus and context menu. Additionally the focus is set
                  to TX view most of the time.
		- Sound history implemented. Enabled and set to 20sec by default.
		- Sound history is configurable from 5 to 60 seconds and it may be switched off if low on memory.
		- PSK: Sync was sped up 2x, new selection for sync speed was added. The Slow (DX) mode is equal to the 
		  previous sync value. The Fast is equal to 4x the previous value.

2007-06-03  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.8
		- AutoCQ feature implemented. Put "$autocq" or "${autocq:secs}" at the start of the macro.
		  AutoCQ is stopped by any command (for example TX stop) or key press. AutoCQ indication still missing.
		  ESC key anywhere in the application kills TX.
		- Added RTTY submodes HAM 45/170 and 45/200.
		- Added RTTY submodes for meteo reception: DWD 50/85 and 50/450, which were requested by yachters.
		  DWD stands for Deutsche Wetterdienst (German Meteo Service)
		  50/85 is transmitted 20kW on 147,3kHz
		  50/450 is transmitted 1kW on 4583, 7636, 11039 and 14467,3kHz, 10kW on 10110,8kHz

2007-01-21  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.8-pre4
		- BAUDOT unshift on space configurable. It needs to be switched off for SYNOP.
		- Bugfix of Handheld PC 2000 build (Jornada 720, UI problems)
		- Sound support rewritten from full duplex to half duplex. TX will work correctly on more devices now.
		- Fixed missing binary dependency on Windows 95.

2007-01-14  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.7
		- Added OLIVIA/CONTESTIA/RTTYM modes. Initial implementation without channel equalization.
		- The three new modes tested for compatibility against MULTIPSK 4.1.2
		- Known issue of THROB: AFC does not work correctly
		- Overload indication. Magenta stripes are drawn over the waterfall if mic input is overdriven.

2006-11-05  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.7-pre
		- Fixed <NULL> bug in RTTY
		- Fixed CW TX speed setting problem.
		- Fixed problem of hanging CW TX at slow speeds.
		- RTTY filters changed from IIR to FIR, which are faster on a fixed point CPU
		- Added THROB/THROBX modes
		- Enabled reverse for MFSK16
		- Premliminary port of Feld Hell. Only TX enabled, paper tabe control is still missing for RX.
		- Added setting of TX prefetch sound card buffers. If experiencing rattling sound during TX, increasing number of prefetch buffers may help
		- Adding error message boxes to report problems with sound card. It shall clarify, whether some of the OEMs are lazy to support duplex sound input/output

2006-11-05  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.6
		- Added squelch to PSK and MFSK16 modes
		- All whitespaces of a macro line will be ignored if the macro stays alone on a line
		- Bugfix - enters are not duplicated in the RX window anymore
		- Added logging to a file. Stored to My Documents\PocketDigi\ChannelXX.log per every channel.
		- Clean up of layout on the desktop build.
		- Bugfix - waterfall will be resized correctly while changing between portrait and landscape.
		- Added left/right buttons to the waterfall. Tapping them is easier than dragging the ruler.
		- More precise fixed point logarithm for waterfall.

2006-10-21  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.6-pre
		- Fixed QPSK31 decoder
		- Initial MFSK16 implementation. Tuning arrow shall be pointed to the idle (zero) tone.

2006-08-12  Vojtech Bubnik <bubnikv@seznam.cz>
	* 1.0.5 - Added macros, send file, station info, QSO info.
		- Added RX/TX context menus. Clear window, select call, RST, QTH etc from the receive window.
		- Added waterfall threshold and range settings.
		- Added waterfall speed selection.
		- Added TX volume slider.
		- Added device info dialog. For debugging purposes.
                - bugfix - TX will be restarted after the device is switched off/on
		- Fixed BPSK31 sync gain. It does not depend on input volume now.
		- Fixed main screen layout. Menu will not be hidden.

2006-06-18  Vojtech Bubnik <bubnikv@seznam.cz>

	* 1.0.4 - added CW mode
		- added BPSK63 mode
		- added AFC for PSK31

2006-05-15  Vojtech Bubnik <bubnikv@seznam.cz>

	* 0.0.2 - added RTTY mode
                - bugfix - RX and TX windows are scrolling correctly
	* 0.0.3 - fixed hangup on exit

2006-04-17  Vojtech Bubnik <bubnikv@seznam.cz>

	* 0.0.1 - First public release of PocketDigi
